Skip to content
Adtec Electrical Services

What to check about electrics before buying a house

Checking the electrical installation before exchange can help you understand safety concerns, likely disruption and the work your plans may require.

Short answer

Ask for electrical installation certificates, previous inspection reports and relevant Building Regulations evidence, then read their scope and dates. A general building survey does not usually include the detailed inspection and testing of an EICR. If records are missing, concerns are visible or substantial alterations are planned, arrange an electrical assessment while there is still time to make informed decisions.

Start with documents, but read what they cover

Ask the seller, through the appropriate agent or solicitor, for electrical installation certificates, Minor Electrical Installation Works Certificates, previous EICRs and relevant Building Regulations evidence. Request the full documents rather than a screenshot of the front page. Schedules, test results and recorded limitations can explain far more than a statement that the electrics were checked recently.

Check the address, date and description of work. A certificate for a new cooker circuit does not certify every circuit in the house. An EICR records an assessment at a particular time and within a particular scope; it is not a promise that the installation will remain unchanged or fault-free. Later alterations can make older records less representative.

Missing paperwork does not prove that every circuit is unsafe, but it creates uncertainty that should be resolved sensibly. Let your solicitor advise on legal and conveyancing implications while an electrician addresses electrical condition. Our installation certificate information helps distinguish the documents without assuming that one type is interchangeable with another.

Understand the limits of a general house survey

A building survey may identify visible electrical concerns and recommend a specialist inspection. It does not usually include the electrical measurements and detailed circuit testing needed to establish installation condition. Read your surveyor's terms rather than assuming that a reassuring summary means every socket, circuit and protective device has been tested.

An Electrical Installation Condition Report, or EICR, is intended to assess the condition of the existing electrical installation within an agreed scope. The electrician inspects accessible parts and carries out relevant tests, recording observations and limitations. It is not a complete destructive examination of every hidden cable, and access restrictions can materially affect what can be concluded.

The EICR guide explains the process, while testing and certification services provide the wider context. For a purchase, make clear that the report is intended to inform a buying decision. Ask what access is required, how long power interruptions may last and whether the seller can make the relevant areas available.

What you can notice during a viewing

Without removing covers or touching anything suspect, look at the general condition of visible accessories. Cracked sockets, scorch marks, loose fittings, exposed wiring and makeshift extension arrangements justify further questions. A consumer unit with unclear labels or signs of damage also deserves attention. Photographs, taken with permission, can help an electrician understand what needs assessing.

Notice whether additions appear to have accumulated over time: a converted garage, loft room, garden office or altered kitchen may have separate electrical histories. Ask when work was done and whether supporting documents exist. The aim is not to judge competence by the colour of an accessory, but to identify where the paperwork and the present layout need to match.

Do not switch suspect circuits repeatedly or remove an accessory to inspect the wiring. Age alone is not a reliable verdict either. Old-looking equipment can require attention, but only a proper assessment establishes the nature and extent of defects. The old wiring guide and signs a house needs rewiring can help frame questions without turning a viewing into a DIY inspection.

Arrange access before the purchase timetable tightens

Speak to the seller or agent about access for inspection early enough to avoid a rushed decision immediately before exchange. The electrician may need the consumer unit, accessible sockets, loft access and information about connected equipment. Furniture, stored belongings and locked outbuildings can limit the inspection, so discuss practical arrangements rather than simply booking an hour in the diary.

Testing normally involves some interruption to electrical supplies. The seller needs to know this in advance, especially where someone works from home or uses important powered equipment. Alarms, freezers and sensitive electronics should be considered when agreeing the visit. The electrician can explain preparations and any limitations that cannot reasonably be overcome.

Ensure you understand who commissions and receives the report and whether the inspector can discuss findings with you. A seller's existing report may still be useful, but review its scope and limitations rather than assuming it answers your questions. If access is refused, discuss the resulting uncertainty with your solicitor and surveyor instead of treating a quick visual visit as an equivalent substitute.

Want a fixed written quote? Call 01235 430442 or send us the details.

Read findings without assuming every recommendation is urgent

Condition codes and further investigation

An EICR uses observation codes to communicate the significance of findings. C1 identifies danger present, C2 potentially dangerous conditions, and FI further investigation required without delay; these normally make the overall report unsatisfactory. C3 is an improvement recommendation and does not by itself make the report unsatisfactory. Read the description as well as the code.

A report does not automatically mean the entire house needs rewiring. Some defects can be corrected locally; others reveal a broader problem that needs more investigation. Ask the electrician to explain the necessary remedial scope and any uncertainties before you seek quotations. The EICR codes guide provides a useful starting point.

Separate safety-related work from improvements you want for convenience. Extra sockets, different lighting and a future induction hob can be worthwhile, but they should not be presented as defects simply because the existing house does not match your preferred layout. Keeping those lists separate makes purchase discussions and post-completion planning much clearer.

Turn the findings into a practical renovation plan

Think about how you intend to use the house, not only whether the present installation is serviceable. An electric vehicle charger, heat pump, larger kitchen or home office may change demand and circuit requirements. Tell the electrician about these plans so necessary investigations can support the next stage rather than being repeated after you move in.

If rewiring or extensive alterations appear likely, coordinate them before decorating and fitting new floors. Access, occupancy and the construction of the house can have a large effect on disruption. The full versus partial rewire guide explains why retaining suitable circuits may sometimes be possible, while domestic rewiring services cover the wider project discussion.

Request a written scope that distinguishes known work, provisional assumptions and work needing further access. Do not convert a brief viewing comment into a fixed repair total. Adtec gives a fixed written quote after seeing the job, with the proposed scope agreed around the actual installation. Your solicitor or agent can advise how any findings should be handled in the purchase negotiations.

When to call an electrician

Arrange an electrical inspection when the available records do not provide enough confidence, the survey recommends it, visible defects exist or your proposed changes are substantial. The inspection should happen early enough to inform decisions, not merely to collect another document after every deadline has passed. It can also help distinguish immediate concerns from work that can sensibly be planned after completion.

If a viewing reveals smoke, sparking, scorching or apparently exposed live parts, keep clear and notify the occupier or agent immediately. Do not investigate or operate damaged equipment. The occupier should arrange urgent professional advice and contact emergency services where appropriate. A buyer's interest in the house is not a reason to carry on testing something that appears dangerous.

To discuss a pre-purchase assessment, contact Adtec with the property type, available reports and the intended purchase timetable. Adtec Electrical Services Ltd undertakes domestic electrical work and testing across its working area, with domestic work closer to Wantage. Confirm access and scope first so the resulting advice addresses the decisions you actually need to make.

Want a fixed written quote? Call 01235 430442 or send us the details.

Frequently asked questions

There is not a universal requirement for every owner-occupier sale to include a new EICR in England. Your solicitor can advise on the transaction, and you can request an inspection where condition remains uncertain.

No, installation certification relates to described installation work, while an EICR assesses existing condition. Check the document heading and scope before relying on it for a purchase decision.

That is a purchasing decision, not an automatic electrical conclusion. First establish the significance, remedial scope and any remaining uncertainty, then take advice from your property professionals.

No inspection can provide that unconditional assurance, especially where wiring is concealed. A clear report explains the assessment undertaken and the limitations affecting its conclusions.

It may provide useful information if it relates to the same installation and is sufficiently current. Review any changes, limitations and outstanding remedial work before deciding whether further assessment is needed.

Related pages

CallQuote