Skip to content
Adtec Electrical Services

Electrical work for landlords near Wantage

Adtec helps landlords plan electrical inspections, address defects and coordinate work between tenancies.

Short answer

Landlords can contact Adtec for EICRs, remedial electrical work, smoke alarms and between-tenancy improvements. Domestic work stays closer to Wantage; commercial work is generally within about 35 miles of Lyford across Oxfordshire and surrounding counties. Hours are Monday to Friday, 7:30am to 5:30pm, with no service implied.

Choose the right starting point for the property

A landlord enquiry may concern a routine inspection, an unsatisfactory report or a list of changes before new tenants move in. These are different jobs and should not be bundled into an unexplained compliance package. Start with the property address, tenancy status and any existing reports. Adtec Electrical Services Ltd, established in 2014, undertakes domestic, commercial and industrial electrical work from its base in Lyford near Wantage.

Domestic work stays closer to Wantage, while commercial work is generally within about 35 miles of Lyford across Oxfordshire and surrounding counties. Check areas we cover and share the address before making access commitments with tenants or an agent. The most useful booking information includes the inspection due date, occupancy arrangements and whether there are known electrical concerns requiring attention independently of a routine report.

Landlord EICRs and the rules in England

Inspection intervals and tenant information

For tenancies within the Electrical Safety Standards in the Private Rented Sector (England) Regulations 2020, the electrical installation must generally be inspected and tested by a qualified person at least every five years, or sooner if the report requires it. There are scope details and exceptions, so check the rules for your tenancy rather than assuming one sentence covers every letting arrangement.

A copy of the report generally needs to reach existing tenants within 28 days and new tenants before occupation, with other supply requirements applying in particular circumstances. If the report requires remedial or further investigative work, the regulations generally require completion within 28 days or the shorter period specified. Read landlord EICR rules and check current official guidance where a deadline or unusual tenancy arrangement is involved.

See landlord EICRs for the inspection service. Arrange access with appropriate notice and discuss expected interruptions. An inspection should not be read as proof that every appliance or every part of a building has been assessed; the report records its scope, limitations, observations and findings about the installation.

Turning an unsatisfactory report into a clear work scope

Send the complete report rather than just the front-page outcome. C1, C2 and FI observations have different meanings, while a C3 recommendation alone does not normally make an EICR unsatisfactory. EICR observation codes explains the distinctions. A C1 danger requires immediate action, and other observations should be addressed according to their significance and the applicable deadlines rather than placed on a generic future maintenance list.

Remedial work should respond to the actual findings. Ask for each proposed task to be linked to the relevant observation and for additional discoveries to be explained before further work is authorised. Depending on the work, confirmation and appropriate certification will be needed; another whole-property EICR is not automatically the only acceptable record. Keep the original report and the evidence of completed work together, and follow the regulatory requirements for supplying confirmation to the relevant people.

Want a fixed written quote? Call 01235 430442 or send us the details.

Smoke alarms and between-tenancy checks

Detection and fixed wiring need separate attention

In England, relevant rented properties generally require a smoke alarm on each storey with living accommodation and a carbon monoxide alarm in rooms used as living accommodation containing a fixed combustion appliance, excluding gas cookers. Landlords must ensure required alarms work at the start of a new tenancy and address reported faults as the rules require. Licensing conditions or building requirements may call for more, so do not treat this outline as a complete property-specific specification.

Use smoke and heat alarm installation and the smoke alarm regulations guide to plan the electrical work. Between tenancies, consider damaged accessories, missing covers, unsuitable alterations and whether the existing layout encourages unsafe extension-lead use. An empty property can offer useful access, but vacancy does not itself establish that the installation is safe or that an earlier report remains suitable after subsequent changes.

When to call an electrician

Contact an electrician before the inspection deadline, when a tenant reports electrical symptoms or when planned refurbishment changes the fixed installation. Repeated tripping, broken sockets and signs of overheating should not wait solely because a periodic report is not yet due. Domestic fault finding addresses specific problems, while a planned EICR provides a broader assessment within its agreed scope.

If there is a burning smell or hot socket, occupants should stop using it and switch off the affected circuit at the board if safe. For smoke, fire or immediate danger, they should leave and call 999. Adtec operates Monday to Friday, 7:30am to 5:30pm; this page is not an emergency attendance offer. Give tenants a suitable reporting procedure rather than relying on an unanswered online enquiry for urgent risks.

Access, permissions and written quotations

Identify whether the landlord, agent or tenant will provide access and who can approve further work. Share any restrictions around pets, working from home, medical equipment or circuits that support essential services. Ask what rooms and fixed accessories must be accessible, and ensure notice and entry arrangements comply with the tenancy and applicable law. A planned inspection should not depend on asking the electrician to negotiate an unexpected access dispute.

Adtec provides a fixed written quote after seeing the job. Keep inspection, remedials and optional improvements distinguishable so costs and authorisations are clear. Testing and certification explains the wider services, while domestic electrical work covers alterations beyond the report findings. Call 01235 430442 or use contact with the property details, report and timing requirements. Retain the finished records where the next property manager can locate them, not only in an individual email thread.

Want a fixed written quote? Call 01235 430442 or send us the details.

Frequently asked questions

The complete report is a useful starting point, but the condition and proposed repair may still need assessment on site. Share all observations and limitations so the quotation is based on the actual scope.

Not automatically if an appropriate report remains valid and circumstances have not changed. The report must still be supplied as required, and new defects or alterations may justify earlier inspection or other work.

It can be discussed as part of a combined scope. Specify the property layout and existing alarm system so the required work is established rather than assuming every tenancy needs the same products.

An EICR concerns the fixed electrical installation within its stated scope. Appliance maintenance and any appropriate inspection or testing need to be considered separately, with responsibilities made clear.

Related pages

CallQuote